Molding & Casting - Page 3 - On Sale Now! Save up to 8%


On Sale! Up to 8% off on Molding & Casting at Scahms, Page 3. Top brands include Mold Creations, AeroMarine Products, ComposiMold, SOLAREZ, Alumilite, Raw Material Suppliers, Polytek, Holden's Latex, Metalpowdersusa, Pro-tocast, Smooth-On, Skullduggery, & Pen Kit Mall. Hurry! Limited time offers. Offers valid only while supplies last.



Slate Look Downspout Splash Guard Concrete Mold 7047
Slate Look Downspout Splash Guard Concrete Mold 7047
By Mold Creations
In Stock
$52.00

mpn: 7047,

4.2 out of 5 stars with 32 reviews
Nice sized slate look downspout splash guard mold. The mold works great with concrete, plaster and resins. This splash guard mold will make a finished stone that will measure about 21 1/2 inches long by 8 1/2 inches wide at the top and 10 1/2 inches wide at the bottom and 3 inches tall. All molds come with basic instructions for creating your pieces. Molds are ideal for business or hobby use. Our molds are made of several different blends of polyethylene plastic which allows you to use the


AM 128 Silicone Rubber RTV 4.4 lb Kit
AM 128 Silicone Rubber RTV 4.4 lb Kit
By AeroMarine Products
In Stock
$70.00

mpn: 128h, ean: 0609465398891,

4.6 out of 5 stars with 46 reviews
Pourable Silicone Mold Making Rubber, RTV Molding Rubber. Durometer, Shore A 28. Pot life approx 30-45 minutes. Use petroleum jelly to separate silicone when using with glass and other silicones for the best results. Demold time 16-24 hours. 4.4 lb Kit NOTE: THIS PRODUCT IS NOT ELIGIBLE FOR AMAZON FREE SHIPPING.AeroMarine AM 128 - Our most popular moldmaking product. High tear strength - Low viscosity - Fast demold time - Ideal for production molds. The choice of professional mold makers. Make


ComposiMold Used 25lbs
ComposiMold Used 25lbs
By ComposiMold
In Stock
$239.99
4.6 out of 5 stars with 17 reviews
Filtered Used ComposiMold. ComposiMold is re-usable! You can buy used, but filtered, ComposiMold that you can melt and re-use for your own molding and casting applications.ComposiMold is a 100% reusable mold making material that works by melting and pouring. Many casts can be made using the same mold. ComposiMold is good for the mold maker and craft artist because it can be reused to make different molds without worrying about wasting mold making material. ComposiMold is an excellent material


SOLAREZ UV Cure Clear Casting Resin (Gallon) for DIY Jewelry, Hobby, Craft Decoration Making - Crystal Clear Solar Cure Molding and Casting Resin
SOLAREZ UV Cure Clear Casting Resin (Gallon) for DIY Jewelry, Hobby, Craft Decoration Making - Crystal Clear Solar Cure Molding and Casting Resin
By SOLAREZ
In Stock
$70.32

mpn: 71604, ean: 0728392716049,

4.2 out of 5 stars with 29 reviews
''Solarez Clear Casting UV Cure Resin is a water-clear, UV curable polyester resin that will cure by either exposure to sunlight in roughly 3 minutes or by adding MEKP catalyst the old-fashioned way, hardening in 30 minutes. Either way, you can quickly make beautiful clear-cast parts with Solarez. Product Tip: UV casting of parts takes into consideration many things; amount (mass) of resin to be cured, ambient temperature and surface contour of the part you want the resin to cure around. If [U


Alumilite Clear Casting Resin 2 Part 32 Oz
Alumilite Clear Casting Resin 2 Part 32 Oz
By Alumilite
In Stock
$47.49

mpn: #NA, ean: 0045635104884,

4.2 out of 5 stars with 38 reviews
Alumilite Clear Casting Resin 2 Part 32 Oz Alumilite Clear is Alumilite's most optically/crystal clear resin that is easy to use and great for a wide variety of clear casting applications. Its low viscosity and 1:1 mix ratio by weight makes it extremely easy to use. Vacuum or pressure is recommended to achieve 100% bubble free castings but minimal bubbles can be achieved by slowly mixing and pouring the resin. It offers superior polishability than other clear resins and able to achieve maximum s


Solarez UV Cure Clear Casting Resin (Quart) for DIY Jewelry Craft Decoration Making - Crystal Clear
Solarez UV Cure Clear Casting Resin (Quart) for DIY Jewelry Craft Decoration Making - Crystal Clear
By SOLAREZ
In Stock
$35.05

mpn: 71504, ean: 0728392715042,

4.6 out of 5 stars with 46 reviews
''Solarez Clear Casting UV Cure Resin is a water-clear, UV curable polyester resin that will cure by either exposure to sunlight in roughly 3 minutes or by adding MEKP catalyst the old-fashioned way, hardening in 30 minutes. Either way, you can quickly make beautiful clear-cast parts with Solarez. Product Tip: UV casting of parts takes into consideration many things; amount (mass) of resin to be cured, ambient temperature and surface contour of the part you want the resin to cure around. If


Magikmold T-124 Tin Cure Silicone - 8.8 lb Kit - Yellow Medium Catalyst
Magikmold T-124 Tin Cure Silicone - 8.8 lb Kit - Yellow Medium Catalyst
By Raw Material Suppliers
In Stock
$126.50

mpn: Magikmold T-124, ean: 0619159380682,

4.2 out of 5 stars with 48 reviews
Magikmold T-124will reproduce the finest detail! With about 60-90 minutes working time and a 15-18 hour de-mold. For faster cure use Yellow or Red for fastest cure. It comes pourable; you can make it brush-able with the thixotropic additive. Magikmold T-124 has become a favorite and is our top seller! It is a high strength, pourable two component RTV silicone rubber which cures at room temperature. Very thin and easy to pour we recommend this for duplication of models high in detail and with


Polytek EasyFlo 90 Liquid Plastic (15.2lb Kit)
Polytek EasyFlo 90 Liquid Plastic (15.2lb Kit)
By Polytek
In Stock
$122.99

mpn: EasyFlo 90, ean: 0686603385487,

4.1 out of 5 stars with 13 reviews
EasyFlo 90 Liquid Plastic is a two-part, liquid polyurethane resin that cures (RTV) to white, Shore D70 plastic. This product has a simple 1A:1B mix ratio by volume or weight and a demold time of 1 to 2 hours. EasyFlo 90 is a super low-viscosity, pourable plastic, but it can be easily thickened with PolyFiber II Thickener for brush-on application. For spray application, consider EasyFlo Spray FR.Mix Ratio: 1A: 1B volume, 100A: 90B weight. Shore Hardness: D70. Pour Time: 5 min.. Demold Time: 1-2


Polytek PolyFoam F-5 Flexible Casting Foam 5lb/ft3 (16lb Kit)
Polytek PolyFoam F-5 Flexible Casting Foam 5lb/ft3 (16lb Kit)
By Polytek
In Stock
$129.99

mpn: PolyFoam F-5, ean: 0686603384657,

4.4 out of 5 stars with 50 reviews
PolyFoam F-5 is a two-part, flexible polyurethane casting foam. This self-skinning foam has a free-rise density of 5 lb/ft³, but should be cast at a density of 8 to 15 lb/ft³ to achieve good surface detail and mold fill. PolyFoams are useful for creating props, tools and any decorative, functional or artistic object which needs to be flexible and lightweight. These flexible foams should be cast into PlatSil or TinSil silicone rubber molds, but can be cast into polyurethane rubber molds that


HX-660 Natural Liquid Latex Mold Making Rubber (2 Gallon Bucket)
HX-660 Natural Liquid Latex Mold Making Rubber (2 Gallon Bucket)
By Holden's Latex
In Stock
$110.00

mpn: HX660,

4.3 out of 5 stars with 43 reviews
HX-660 Latex is the pre-vulcanized form of HX-80. It was designed specifically for short run polyester work. When polyester resins are cast into natural Latex, a tackiness develops on the surface of the rubber and/or polyester cast. This is due to free sulfur not combining with the mold. The problem can be solved by using a pre-vulcanized Latex such as HX-660. Pre-vulcanized molding compounds contain no free sulfur on the surface and can therefore be used for short run polyester resin casting;


HX-874 Natural Liquid Latex Mold Making Rubber (Two Gallons)
HX-874 Natural Liquid Latex Mold Making Rubber (Two Gallons)
By Holden's Latex
In Stock
$110.00

mpn: HX874,

4.7 out of 5 stars with 7 reviews
A high solids latex for those who wish to make figurines or products out of cement or plaster. HX-874 Latex is low ammonia formulation with a high solids content. It produces a superior mold of extraordinary resistance to the pouring of concrete and plaster. The HX-874 Latex produces fine line detail, gives long mold life and remains flexible for long periods of time.A brush-on natural latex for making molds. For the creation of highly durable commercial grade rubber molds that reproduce


Nickel Silver -325 Mesh Five pounds (5LBS) Ships 1-3 Days Priority Mail
Nickel Silver -325 Mesh Five pounds (5LBS) Ships 1-3 Days Priority Mail
By Metalpowdersusa
In Stock
$95.00

mpn: NSP5LBS, ean: 0659436957725,

4.1 out of 5 stars with 17 reviews
Fine powders -325 MeshFine powder perfect for cold casting and inlays.


Pro-tocast 360 Multi-Directional Manual Rotocasting Machine w/ 12'' Platform
Pro-tocast 360 Multi-Directional Manual Rotocasting Machine w/ 12" Platform
By Pro-tocast
In Stock
$149.95

mpn: PC4, ean: 0860000130769,

4.1 out of 5 stars with 15 reviews
12'' X 12'' Platform. Usable Space: 1800 cubic inches. Overall Size: 28'' X 24'' X 18''. Weight Limit: 10 lbs. 99% Assembled. Just attach the platform and legs and you're all set. The actual product may vary slightly from what is pictured. The Pro-tocast is a 360 multi-rotational casting machine that makes bring your ideas to life that much easier! Compared the 3D printing, Pro-tocasting is... More Cost Effective - The cost of consumer 3D printers can range from several hundred dollars to


Polytek PT Flex 85 Liquid Rubber (16lb Kit)
Polytek PT Flex 85 Liquid Rubber (16lb Kit)
By Polytek
In Stock
$148.99

mpn: PT Flex 85, ean: 0686603384497,

4.8 out of 5 stars with 26 reviews
PT Flex 85 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a yellow/amber, Shore A85 rubber. PT Flex Series rubbers were specifically designed for prototyping and model making applications and offer fast pour times (~5 minutes) and fast demold times (~2 hours). Notes: The color of polyurethane Part Bs may change in color from batch to batch or with time, but product performance is not affected.Mix Ratio: 1A:1B. Shore Hardness: A85. Pour Time: 5 min.. Cured Color:


2-PACK - Alumilite Amazing Casting Resin, 16-Ounce each
2-PACK - Alumilite Amazing Casting Resin, 16-Ounce each
By Alumilite
In Stock
$32.92

mpn: 43216-126832, ean: 0789474214433,

4.3 out of 5 stars with 43 reviews
AMAZING PUTTY-Amazing Casting Resin Kit. Amazing Casting Resin is the easiest and safest way to create exact cast replicas of practically anything in minutes! Simply mix equal amounts of resin and hardener and pour into your mold (mold putty sold separately). Less than 10 minutes later remove a beautiful cast replica of your original. Your cured Amazing Casting Resin piece can be painted stained dyed tapped drilled and machined. Each package contains two 8oz bottles of casting resin (mix the


Mold Max 14NV Silicone Mold Making Rubber - Trial Unit
Mold Max 14NV Silicone Mold Making Rubber - Trial Unit
By Smooth-On
In Stock
$27.26

ean: 0751635534414,

4.1 out of 5 stars with 44 reviews
Mold Max® 14NV is a Shore 15A tin-catalyzed silicone rubber that offers low viscosity, fast cure and long library life. Mix ratio is 100A:10B by weight. Working time is 30 minutes and cure time is 4 hours at room temperature. Mold Max® 14NV will reproduce the finest detail and is suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 14NV can also be used to create movie sp


Perfect Craft Gestures Perfect Cast Molding and Casting Kit
Perfect Craft Gestures Perfect Cast Molding and Casting Kit
By Skullduggery
In Stock
$24.99
$22.89
You Save: 8%

mpn: 07720, ean: 0605440772076,

4.9 out of 5 stars with 44 reviews
The Perfect Craft Gestures Casting Kit by Skullduggery combines creativity, discovery, and learning in one exciting artistic journey. Each kit includes everything needed to create and cast masterpiece of your hand, foot or practically anything else you can think of:-2 lb of PerfectCast Casting Material-1 lb of Alginate Molding Material-86oz/2.54lt molding bucket-Complete InstructionsFirst, follow the instructions to make a mold of a simple item of your choice using the Alginate Molding


Alumilite Clear Casting Resin (Slow) Low Viscosity, Transparent, 32 oz. Package 12 MIN Open TIME
Alumilite Clear Casting Resin (Slow) Low Viscosity, Transparent, 32 oz. Package 12 MIN Open TIME
By Pen Kit Mall
In Stock
$48.99
$47.99
You Save: 2%

mpn: 32 OZ ALUMILITE SLOW,

4.8 out of 5 stars with 52 reviews
This 32 oz. package of Alumilite Clear (SLOW) is a transparent resin that is simple to use and is useful for a multitude of applications. It has a low viscosity, (so it is very thin), and its 1:1 mix ratio by weight makes it almost effortless to use. It offers exceptional polish ability, allowing your finished product to shine. Recommended for industrial use only. B side may thicken and may need to be reheated before use.Transparent casting resin. 32 Oz. Clear Color. 12 MINUTE OPEN TIME. Polisha


Mold Max 40 Silicone Mold Making Rubber - Trial Unit
Mold Max 40 Silicone Mold Making Rubber - Trial Unit
By Smooth-On
In Stock
$27.75

mpn: unknown, ean: 0751635824416,

4.9 out of 5 stars with 34 reviews
Mold Max® RTV silicone rubbers will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® silicones can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).Medium Hardness Shore 40A Tin Silicone Rubber. Will reproduce the finest


Smooth-On Mold Max 30 Silicone Mold Making Rubber - Trial Unit
Smooth-On Mold Max 30 Silicone Mold Making Rubber - Trial Unit
By Smooth-On
In Stock
$27.25

mpn: unknown, ean: 0751635836419,

4.4 out of 5 stars with 14 reviews
Mold Max RTV silicone rubbers will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max silicones can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).Medium Hardness Shore 30A Tin Silicone Rubber. Will reproduce the finest



Viewing Page 3 of 6

View more products in Sculpture Supplies.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scahms.org. All Rights Reserved.